These results are ranked by popularity.
Error | |
---|---|
E251-0000 | Description: The inverter cooling fan rotation is faulty. |
E413-0001 | Description: The ADF shift motor rotation is faulty. The shift motor HP sensor is open. |
E002-0010 | Description: The fixing unit has overheated. After correcting the error, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR) The power has been turned on without resetting the error. |
E067-0000 | Description: The high-voltage output has a fault. A fault is detected at the same time in 2 of the following: primary high voltage, pre-transfer high voltage, transfer high voltage, separation high voltage. |
E717-0001 | Description: An error exists in the communication with the NE controller. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR) The NE controller that has been connected before power-off is not recognized at power-on. |
The most common error codes.
Error | |
---|---|
E251-0000 | Description: The inverter cooling fan rotation is faulty. |
E413-0001 | Description: The ADF shift motor rotation is faulty. The shift motor HP sensor is open. |
E002-0010 | Description: The fixing unit has overheated. After correcting the error, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR) The power has been turned on without resetting the error. |
E067-0000 | Description: The high-voltage output has a fault. A fault is detected at the same time in 2 of the following: primary high voltage, pre-transfer high voltage, transfer high voltage, separation high voltage. |
E717-0001 | Description: An error exists in the communication with the NE controller. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR) The NE controller that has been connected before power-off is not recognized at power-on. |
E251-0000 | Description: The inverter cooling fan rotation is faulty. |
E413-0001 | Description: The ADF shift motor rotation is faulty. The shift motor HP sensor is open. |
E002-0010 | Description: The fixing unit has overheated. After correcting the error, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR) The power has been turned on without resetting the error. |
E067-0000 | Description: The high-voltage output has a fault. A fault is detected at the same time in 2 of the following: primary high voltage, pre-transfer high voltage, transfer high voltage, separation high voltage. |
E717-0001 | Description: An error exists in the communication with the NE controller. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR) The NE controller that has been connected before power-off is not recognized at power-on. |