These results are ranked by popularity.
Error | |
---|---|
E744-0003 | Description: The boot ROM and the firmware have a mismatch of model or type: at time of start-up, the language file is absent. |
E5F9-0001 | Description: The inlet cover switch (MS1S) is faulty. The front cover switch (MS2S) is faulty. The delivery cover switch (MS3S) is faulty. The saddle stitch controller PCB is faulty. When the inlet cover, front cover, and the delivery cover are found to |
E532-0001 | Description: The stapler shift home position sensor (PI7) is faulty. The stapler shift motor (M4) is faulty. The finisher controller PCB is faulty. The stapler unit does not leave home position when the stapler shift motor has been driven for 4 secs. |
E204-0001 | Description: The ADF controller PCB is faulty. The reader controller PCB is faulty. During printing, the image leading edge signal does not arrive from the ADF. |
E593-0002 | Description: The horizontal registration home position sensor (PI1P) is faulty. The horizontal registration motor (M1P) is faulty. The punch driver PCB is faulty. The puncher does not return to home position when the horizontal registration motor has be |
The most common error codes.
Error | |
---|---|
E744-0003 | Description: The boot ROM and the firmware have a mismatch of model or type: at time of start-up, the language file is absent. |
E5F9-0001 | Description: The inlet cover switch (MS1S) is faulty. The front cover switch (MS2S) is faulty. The delivery cover switch (MS3S) is faulty. The saddle stitch controller PCB is faulty. When the inlet cover, front cover, and the delivery cover are found to |
E532-0001 | Description: The stapler shift home position sensor (PI7) is faulty. The stapler shift motor (M4) is faulty. The finisher controller PCB is faulty. The stapler unit does not leave home position when the stapler shift motor has been driven for 4 secs. |
E204-0001 | Description: The ADF controller PCB is faulty. The reader controller PCB is faulty. During printing, the image leading edge signal does not arrive from the ADF. |
E593-0002 | Description: The horizontal registration home position sensor (PI1P) is faulty. The horizontal registration motor (M1P) is faulty. The punch driver PCB is faulty. The puncher does not return to home position when the horizontal registration motor has be |
E744-0003 | Description: The boot ROM and the firmware have a mismatch of model or type: at time of start-up, the language file is absent. |
E5F9-0001 | Description: The inlet cover switch (MS1S) is faulty. The front cover switch (MS2S) is faulty. The delivery cover switch (MS3S) is faulty. The saddle stitch controller PCB is faulty. When the inlet cover, front cover, and the delivery cover are found to |
E532-0001 | Description: The stapler shift home position sensor (PI7) is faulty. The stapler shift motor (M4) is faulty. The finisher controller PCB is faulty. The stapler unit does not leave home position when the stapler shift motor has been driven for 4 secs. |
E204-0001 | Description: The ADF controller PCB is faulty. The reader controller PCB is faulty. During printing, the image leading edge signal does not arrive from the ADF. |
E593-0002 | Description: The horizontal registration home position sensor (PI1P) is faulty. The horizontal registration motor (M1P) is faulty. The punch driver PCB is faulty. The puncher does not return to home position when the horizontal registration motor has be |