Canon iR5880C Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR5880C Top Searches

These results are ranked by popularity.

Error
E505-0002Description: There is an error in the backup memory of the finisher (finer R1/R2). There is a data error in the punch assembly EEPROM.
E5F6-8005Description: There is an error in saddle butting. The paper pushing plate leading edge position sensor does not turn on when the paper pushing plate motor has been driven for 0.3 sec or more. The paper pushing plate motor (M8S) or the paper pushing plat
E592-8009Description: There is an error in the punch horizontal registration sensor. (punch unit) There is an error in the light-receiving voltage with emission of light. (horizontal registration sensor 4)
E013-0002Description: There is clogging by waste toner. There is a waste toner feedscrew error. The output of the waste toner lock detecting switch (SW14) is '1' for more than 1 sec.
E004-0002Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The

Canon iR5880C Common Errors

The most common error codes.

Error
E505-0002Description: There is an error in the backup memory of the finisher (finer R1/R2). There is a data error in the punch assembly EEPROM.
E5F6-8005Description: There is an error in saddle butting. The paper pushing plate leading edge position sensor does not turn on when the paper pushing plate motor has been driven for 0.3 sec or more. The paper pushing plate motor (M8S) or the paper pushing plat
E592-8009Description: There is an error in the punch horizontal registration sensor. (punch unit) There is an error in the light-receiving voltage with emission of light. (horizontal registration sensor 4)
E013-0002Description: There is clogging by waste toner. There is a waste toner feedscrew error. The output of the waste toner lock detecting switch (SW14) is '1' for more than 1 sec.
E004-0002Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The
E505-0002Description: There is an error in the backup memory of the finisher (finer R1/R2). There is a data error in the punch assembly EEPROM.
E5F6-8005Description: There is an error in saddle butting. The paper pushing plate leading edge position sensor does not turn on when the paper pushing plate motor has been driven for 0.3 sec or more. The paper pushing plate motor (M8S) or the paper pushing plat
E592-8009Description: There is an error in the punch horizontal registration sensor. (punch unit) There is an error in the light-receiving voltage with emission of light. (horizontal registration sensor 4)
E013-0002Description: There is clogging by waste toner. There is a waste toner feedscrew error. The output of the waste toner lock detecting switch (SW14) is '1' for more than 1 sec.
E004-0002Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The