These results are ranked by popularity.
Error | |
---|---|
E514-0002 | Description: fault in trailing edge assist motor (Finisher-Q3/ Q4) The home position sensor does not go on even after the trailing edge assist motor has rotated for a specific period of time. |
E745-0001 | Description: There is a fault on the TokeRing board. An attempt at PCI initialization has failed. |
E202-0001 | Description: There is an error in the detection of the CIS home position. The attempt to detect the home position fails when the CIS is moved forward |
E674-0001 | Description: An error has occurred in communication between the fax control PCB (2-line) and main controller PCB. An attempt to set mode for the fax device has failed. |
E5F3-0002 | Description: Saddle alignment error The aligning plate home position sensor does not go off when the alignment motor has been driven for 1 sec. Alignment motor (M5S)/ aligning plate home position sensor (PI5S) |
The most common error codes.
Error | |
---|---|
E514-0002 | Description: fault in trailing edge assist motor (Finisher-Q3/ Q4) The home position sensor does not go on even after the trailing edge assist motor has rotated for a specific period of time. |
E745-0001 | Description: There is a fault on the TokeRing board. An attempt at PCI initialization has failed. |
E202-0001 | Description: There is an error in the detection of the CIS home position. The attempt to detect the home position fails when the CIS is moved forward |
E674-0001 | Description: An error has occurred in communication between the fax control PCB (2-line) and main controller PCB. An attempt to set mode for the fax device has failed. |
E5F3-0002 | Description: Saddle alignment error The aligning plate home position sensor does not go off when the alignment motor has been driven for 1 sec. Alignment motor (M5S)/ aligning plate home position sensor (PI5S) |
E514-0002 | Description: fault in trailing edge assist motor (Finisher-Q3/ Q4) The home position sensor does not go on even after the trailing edge assist motor has rotated for a specific period of time. |
E745-0001 | Description: There is a fault on the TokeRing board. An attempt at PCI initialization has failed. |
E202-0001 | Description: There is an error in the detection of the CIS home position. The attempt to detect the home position fails when the CIS is moved forward |
E674-0001 | Description: An error has occurred in communication between the fax control PCB (2-line) and main controller PCB. An attempt to set mode for the fax device has failed. |
E5F3-0002 | Description: Saddle alignment error The aligning plate home position sensor does not go off when the alignment motor has been driven for 1 sec. Alignment motor (M5S)/ aligning plate home position sensor (PI5S) |