Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR4530 Top Searches

These results are ranked by popularity.

Error
E740-0002Description: There is an error on the Ether board. The MAC address is illegal.
E592-0007Description: Paper trailing edge sensor/ registration sensor error Error in light-receiving voltage when light is emitted (horizontal registration sensor 3)
E248-0000Description: The backup memory is faulty. [Cause] A check error has occurred on the backup SRAM board. [Location] bottom ROM [Timing of Detection] once when the boot ROM is started up
E5F5-0002Description: Saddle front stapling error The stitching home position sensor does not go off when the switch motor (front) has been rotated in normal direction for 0.5 sec or more. Stitch motor (front; M7S)/ stitching home position sensor (front; MS7S)
E514-0001Description: fault in trailing edge assist motor (Finisher-Q3/ Q4) The home position sensor does not go off even when the trailing edge assist motor has rotated for a specific period of time.

Canon iR4530 Common Errors

The most common error codes.

Error
E740-0002Description: There is an error on the Ether board. The MAC address is illegal.
E592-0007Description: Paper trailing edge sensor/ registration sensor error Error in light-receiving voltage when light is emitted (horizontal registration sensor 3)
E248-0000Description: The backup memory is faulty. [Cause] A check error has occurred on the backup SRAM board. [Location] bottom ROM [Timing of Detection] once when the boot ROM is started up
E5F5-0002Description: Saddle front stapling error The stitching home position sensor does not go off when the switch motor (front) has been rotated in normal direction for 0.5 sec or more. Stitch motor (front; M7S)/ stitching home position sensor (front; MS7S)
E514-0001Description: fault in trailing edge assist motor (Finisher-Q3/ Q4) The home position sensor does not go off even when the trailing edge assist motor has rotated for a specific period of time.
E740-0002Description: There is an error on the Ether board. The MAC address is illegal.
E592-0007Description: Paper trailing edge sensor/ registration sensor error Error in light-receiving voltage when light is emitted (horizontal registration sensor 3)
E248-0000Description: The backup memory is faulty. [Cause] A check error has occurred on the backup SRAM board. [Location] bottom ROM [Timing of Detection] once when the boot ROM is started up
E5F5-0002Description: Saddle front stapling error The stitching home position sensor does not go off when the switch motor (front) has been rotated in normal direction for 0.5 sec or more. Stitch motor (front; M7S)/ stitching home position sensor (front; MS7S)
E514-0001Description: fault in trailing edge assist motor (Finisher-Q3/ Q4) The home position sensor does not go off even when the trailing edge assist motor has rotated for a specific period of time.