Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3300i Top Searches

These results are ranked by popularity.

Error
E315Description: Any of the following is true in the image processing by the main controller: The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
E001-0002Description: The sub thermistor detects about 295C or higher
E532-0001Description: The stapler unit does not leave home position when the stapler slide motor is driven for 4.5 sec
E606-0001Description: A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
E577-0003Description: The stack ascent/descent guide does not leave home position when the paddle motor is driven for 2 sec or more

Canon iR3300i Common Errors

The most common error codes.

Error
E315Description: Any of the following is true in the image processing by the main controller: The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
E001-0002Description: The sub thermistor detects about 295C or higher
E532-0001Description: The stapler unit does not leave home position when the stapler slide motor is driven for 4.5 sec
E606-0001Description: A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
E577-0003Description: The stack ascent/descent guide does not leave home position when the paddle motor is driven for 2 sec or more
E315Description: Any of the following is true in the image processing by the main controller: The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
E001-0002Description: The sub thermistor detects about 295C or higher
E532-0001Description: The stapler unit does not leave home position when the stapler slide motor is driven for 4.5 sec
E606-0001Description: A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
E577-0003Description: The stack ascent/descent guide does not leave home position when the paddle motor is driven for 2 sec or more