These results are ranked by popularity.
Error | |
---|---|
E741 | Description: A network PCI error occurs. • The network PCB cannot be recognized at power-on |
E504-03 | Description: Height sensor (PS1) • The connector is found to be disconnected at poweron. |
E540-02 | Description: • Tray upper limit detecting switch (MS4) • The tray upper limit detecting switch is found to be on while the tray is moving up. |
E100 | Description: The BD of the scanner unit is faulty. • The scanner motor fails to reach a specific revolution within 10 sec after it has started to rotate. • The BD PCB detects an error for 2.5 sec or more after the scanner motor has started to rotate at |
E713 | Description: An IPC finisher error occurs. • The communication between the finisher and the machine remiains interrupted for 3 sec. |
The most common error codes.
Error | |
---|---|
E741 | Description: A network PCI error occurs. • The network PCB cannot be recognized at power-on |
E504-03 | Description: Height sensor (PS1) • The connector is found to be disconnected at poweron. |
E540-02 | Description: • Tray upper limit detecting switch (MS4) • The tray upper limit detecting switch is found to be on while the tray is moving up. |
E100 | Description: The BD of the scanner unit is faulty. • The scanner motor fails to reach a specific revolution within 10 sec after it has started to rotate. • The BD PCB detects an error for 2.5 sec or more after the scanner motor has started to rotate at |
E713 | Description: An IPC finisher error occurs. • The communication between the finisher and the machine remiains interrupted for 3 sec. |
E741 | Description: A network PCI error occurs. • The network PCB cannot be recognized at power-on |
E504-03 | Description: Height sensor (PS1) • The connector is found to be disconnected at poweron. |
E540-02 | Description: • Tray upper limit detecting switch (MS4) • The tray upper limit detecting switch is found to be on while the tray is moving up. |
E100 | Description: The BD of the scanner unit is faulty. • The scanner motor fails to reach a specific revolution within 10 sec after it has started to rotate. • The BD PCB detects an error for 2.5 sec or more after the scanner motor has started to rotate at |
E713 | Description: An IPC finisher error occurs. • The communication between the finisher and the machine remiains interrupted for 3 sec. |