Canon iR3230N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3230N Top Searches

These results are ranked by popularity.

Error
E202-0001Description: There is an error in the detection of the CCD home position. The attempt to detect the home position fails when the CCD is moved forward.
E5F6-0005Description: Saddle butting error The paper butting plate leading edge sensor does not go on when the paper butting plate motor has been driven for 0.3 sec. Paper butting plate more (M8S)/paper butting plate leading edge sensor (PI15S)
E590-0001Description: Punch motor error The punching home position is not detected even when the puncher motor has been driven for 20 msec.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E744-0003Description: There is an error in the language file/boot ROM. There is no language file on the HDD indicated by config.txt for a switchover.

Canon iR3230N Common Errors

The most common error codes.

Error
E202-0001Description: There is an error in the detection of the CCD home position. The attempt to detect the home position fails when the CCD is moved forward.
E5F6-0005Description: Saddle butting error The paper butting plate leading edge sensor does not go on when the paper butting plate motor has been driven for 0.3 sec. Paper butting plate more (M8S)/paper butting plate leading edge sensor (PI15S)
E590-0001Description: Punch motor error The punching home position is not detected even when the puncher motor has been driven for 20 msec.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E744-0003Description: There is an error in the language file/boot ROM. There is no language file on the HDD indicated by config.txt for a switchover.
E202-0001Description: There is an error in the detection of the CCD home position. The attempt to detect the home position fails when the CCD is moved forward.
E5F6-0005Description: Saddle butting error The paper butting plate leading edge sensor does not go on when the paper butting plate motor has been driven for 0.3 sec. Paper butting plate more (M8S)/paper butting plate leading edge sensor (PI15S)
E590-0001Description: Punch motor error The punching home position is not detected even when the puncher motor has been driven for 20 msec.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E744-0003Description: There is an error in the language file/boot ROM. There is no language file on the HDD indicated by config.txt for a switchover.