These results are ranked by popularity.
Error | |
---|---|
E805-0003 | Description: Fan error Lock fails to be detected for 5sec continuously while the ITB fan is driven. Disconnection of the fan connector. Lock signal fails to be sent due to a fan failure. |
E592-0003 | Description: Puncher side registration sensor error Light receiving voltage at the time of light emission is abnormal. |
E514-0001 | Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time. |
E012-0001 | Description: Drum motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate. |
E5F5-0001 | Description: Saddle front side staple error The stitching HP sensor fails to be ON after the stitcher motor (front) rotates in the adverse direction for 0.5 sec. or more. |
The most common error codes.
Error | |
---|---|
E805-0003 | Description: Fan error Lock fails to be detected for 5sec continuously while the ITB fan is driven. Disconnection of the fan connector. Lock signal fails to be sent due to a fan failure. |
E592-0003 | Description: Puncher side registration sensor error Light receiving voltage at the time of light emission is abnormal. |
E514-0001 | Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time. |
E012-0001 | Description: Drum motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate. |
E5F5-0001 | Description: Saddle front side staple error The stitching HP sensor fails to be ON after the stitcher motor (front) rotates in the adverse direction for 0.5 sec. or more. |
E805-0003 | Description: Fan error Lock fails to be detected for 5sec continuously while the ITB fan is driven. Disconnection of the fan connector. Lock signal fails to be sent due to a fan failure. |
E592-0003 | Description: Puncher side registration sensor error Light receiving voltage at the time of light emission is abnormal. |
E514-0001 | Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time. |
E012-0001 | Description: Drum motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate. |
E5F5-0001 | Description: Saddle front side staple error The stitching HP sensor fails to be ON after the stitcher motor (front) rotates in the adverse direction for 0.5 sec. or more. |