Canon iR3035 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3035 Top Searches

These results are ranked by popularity.

Error
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E748-1001Description: There is a mismatch between controller board and SDRAM size. There is a mismatch between the control board and the SDRAM.
E227-0003Description: The reader unit power supply is faulty. At the end of a job, the 24-V port is off.
E716-0000Description: There is an error in the communication with the pedestal. After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec
E001-0000Description: The temperature of the fixing assembly is abnormally high. The reading of the main thermistor is 250 deg C or more continuously for 200 msec.

Canon iR3035 Common Errors

The most common error codes.

Error
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E748-1001Description: There is a mismatch between controller board and SDRAM size. There is a mismatch between the control board and the SDRAM.
E227-0003Description: The reader unit power supply is faulty. At the end of a job, the 24-V port is off.
E716-0000Description: There is an error in the communication with the pedestal. After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec
E001-0000Description: The temperature of the fixing assembly is abnormally high. The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E748-1001Description: There is a mismatch between controller board and SDRAM size. There is a mismatch between the control board and the SDRAM.
E227-0003Description: The reader unit power supply is faulty. At the end of a job, the 24-V port is off.
E716-0000Description: There is an error in the communication with the pedestal. After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec
E001-0000Description: The temperature of the fixing assembly is abnormally high. The reading of the main thermistor is 250 deg C or more continuously for 200 msec.