Canon iR2820 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2820 Top Searches

These results are ranked by popularity.

Error
E001-0002Description: The sub thermistor detects about 295C or higher
E604-0000Description: A fault is detected in the image memory
E315Description: Any of the following is true in the image processing by the main controller: The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
E532-0001Description: The stapler unit does not leave home position when the stapler slide motor is driven for 4.5 sec
E712-0001Description: The communication is not resumed 3 sec or more after data has been written to the error register of the communication IC (IPC) on the ADF controller PCB

Canon iR2820 Common Errors

The most common error codes.

Error
E001-0002Description: The sub thermistor detects about 295C or higher
E604-0000Description: A fault is detected in the image memory
E315Description: Any of the following is true in the image processing by the main controller: The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
E532-0001Description: The stapler unit does not leave home position when the stapler slide motor is driven for 4.5 sec
E712-0001Description: The communication is not resumed 3 sec or more after data has been written to the error register of the communication IC (IPC) on the ADF controller PCB
E001-0002Description: The sub thermistor detects about 295C or higher
E604-0000Description: A fault is detected in the image memory
E315Description: Any of the following is true in the image processing by the main controller: The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
E532-0001Description: The stapler unit does not leave home position when the stapler slide motor is driven for 4.5 sec
E712-0001Description: The communication is not resumed 3 sec or more after data has been written to the error register of the communication IC (IPC) on the ADF controller PCB