These results are ranked by popularity.
Error | |
---|---|
E585-0000 | Description: At the start of the motor CCW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
E032-0001 | Description: The DA unit connection is disconnected (after connection). |
E421-0001 | Description: The back-up data cannot be written to the EEPROM, or the data that has been written has a fault |
E719-0002 | Description: Erroneous communication with coin vender (serial communication) |
E202-0002 | Description: The scanner home position sensor does not go ON when the scanner is moved reverse 450 mm |
The most common error codes.
Error | |
---|---|
E585-0000 | Description: At the start of the motor CCW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
E032-0001 | Description: The DA unit connection is disconnected (after connection). |
E421-0001 | Description: The back-up data cannot be written to the EEPROM, or the data that has been written has a fault |
E719-0002 | Description: Erroneous communication with coin vender (serial communication) |
E202-0002 | Description: The scanner home position sensor does not go ON when the scanner is moved reverse 450 mm |
E585-0000 | Description: At the start of the motor CCW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
E032-0001 | Description: The DA unit connection is disconnected (after connection). |
E421-0001 | Description: The back-up data cannot be written to the EEPROM, or the data that has been written has a fault |
E719-0002 | Description: Erroneous communication with coin vender (serial communication) |
E202-0002 | Description: The scanner home position sensor does not go ON when the scanner is moved reverse 450 mm |