Canon iR2535i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2535i Top Searches

These results are ranked by popularity.

Error
E804-0000Description: Failure of the Power Supply Cooloing Fan (FAN6) When lock signal is detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is stopped. * The same condition is detected after the error retry is performed.
E413-0000Description: Release Motor (M2) error The sensing level of the release motor HP sensor (SR11) does not change within a specified period when the release motor (M2) is driven.
E542-0001Description: Additional Tray Lift Motor (M12) time out error The stack tray does not move within a specified time period.
E014-0002Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E197-0000Description: Error in communication of Laser Driver PCB (PCB14) Communication error 1 with image PCB

Canon iR2535i Common Errors

The most common error codes.

Error
E804-0000Description: Failure of the Power Supply Cooloing Fan (FAN6) When lock signal is detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is stopped. * The same condition is detected after the error retry is performed.
E413-0000Description: Release Motor (M2) error The sensing level of the release motor HP sensor (SR11) does not change within a specified period when the release motor (M2) is driven.
E542-0001Description: Additional Tray Lift Motor (M12) time out error The stack tray does not move within a specified time period.
E014-0002Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E197-0000Description: Error in communication of Laser Driver PCB (PCB14) Communication error 1 with image PCB
E804-0000Description: Failure of the Power Supply Cooloing Fan (FAN6) When lock signal is detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is stopped. * The same condition is detected after the error retry is performed.
E413-0000Description: Release Motor (M2) error The sensing level of the release motor HP sensor (SR11) does not change within a specified period when the release motor (M2) is driven.
E542-0001Description: Additional Tray Lift Motor (M12) time out error The stack tray does not move within a specified time period.
E014-0002Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E197-0000Description: Error in communication of Laser Driver PCB (PCB14) Communication error 1 with image PCB