Canon iR2535 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2535 Top Searches

These results are ranked by popularity.

Error
E261-0000Description: Error in Zero Cross Zero Cross failed to be detected for 500ms or more while the relay was ON. * The same condition is detected after the error retry is performed.
E575-0002Description: Gripper Unit Move Motor (M2) error The gripper unit does not return to the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 0.1 seconds.
E744-0002Description: Oversized language file in HDD
E010-0002Description: Unstable rotation of the Main Motor (M1) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E532-0002Description: STP Move Motor (M1) error The stapler does not return to the stapler move home position when the STP Move Motor (M1) has been driven for 2.8 sec.

Canon iR2535 Common Errors

The most common error codes.

Error
E261-0000Description: Error in Zero Cross Zero Cross failed to be detected for 500ms or more while the relay was ON. * The same condition is detected after the error retry is performed.
E575-0002Description: Gripper Unit Move Motor (M2) error The gripper unit does not return to the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 0.1 seconds.
E744-0002Description: Oversized language file in HDD
E010-0002Description: Unstable rotation of the Main Motor (M1) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E532-0002Description: STP Move Motor (M1) error The stapler does not return to the stapler move home position when the STP Move Motor (M1) has been driven for 2.8 sec.
E261-0000Description: Error in Zero Cross Zero Cross failed to be detected for 500ms or more while the relay was ON. * The same condition is detected after the error retry is performed.
E575-0002Description: Gripper Unit Move Motor (M2) error The gripper unit does not return to the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 0.1 seconds.
E744-0002Description: Oversized language file in HDD
E010-0002Description: Unstable rotation of the Main Motor (M1) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E532-0002Description: STP Move Motor (M1) error The stapler does not return to the stapler move home position when the STP Move Motor (M1) has been driven for 2.8 sec.