Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2320 Top Searches

These results are ranked by popularity.

Error
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E052-0000Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication
E540-0002Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E736-0000Description: CCU communication error The installed modem PCB is incompatible.
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.

Canon iR2320 Common Errors

The most common error codes.

Error
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E052-0000Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication
E540-0002Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E736-0000Description: CCU communication error The installed modem PCB is incompatible.
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E052-0000Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication
E540-0002Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E736-0000Description: CCU communication error The installed modem PCB is incompatible.
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.