Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2250i Top Searches

These results are ranked by popularity.

Error
E577-0000Description: The return roller does not reach home position when the delivery motor (Ml) has been driven as much as will move it to the return roller home position sensor (S3)
E248-0003Description: A difference is discovered between the ID of EEPROM and the ID of ROM upon comparison while writing data
E712-0002Description: The transmission bit is not enabled 10 sec or more in the sync register of the communication IC (IPC) on e reader controller PCB
E505-0002Description: When the main power is turned on, the checksum of the puncher driverPCB has a fault
E019-0000Description: The waste toner case is full of waste toner

Canon iR2250i Common Errors

The most common error codes.

Error
E577-0000Description: The return roller does not reach home position when the delivery motor (Ml) has been driven as much as will move it to the return roller home position sensor (S3)
E248-0003Description: A difference is discovered between the ID of EEPROM and the ID of ROM upon comparison while writing data
E712-0002Description: The transmission bit is not enabled 10 sec or more in the sync register of the communication IC (IPC) on e reader controller PCB
E505-0002Description: When the main power is turned on, the checksum of the puncher driverPCB has a fault
E019-0000Description: The waste toner case is full of waste toner
E577-0000Description: The return roller does not reach home position when the delivery motor (Ml) has been driven as much as will move it to the return roller home position sensor (S3)
E248-0003Description: A difference is discovered between the ID of EEPROM and the ID of ROM upon comparison while writing data
E712-0002Description: The transmission bit is not enabled 10 sec or more in the sync register of the communication IC (IPC) on e reader controller PCB
E505-0002Description: When the main power is turned on, the checksum of the puncher driverPCB has a fault
E019-0000Description: The waste toner case is full of waste toner