Canon iR2230 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2230 Top Searches

These results are ranked by popularity.

Error
E064-0005Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 mse
E602-09XXDescription: There is an error on the hard disk. /DOSDEV5 is faulty.
E5F0-0002Description: Saddle paper positioning plate error The paper positioning plate home position sensor doest not go off when the paper positioning plate motor has been driven for 1 sec. Paper positioning plate motor (M4S)/paper positioning plate home positio
E537-8002Description: Front alignment error (Finisher-S1) The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position.
E514-0001Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is returned to home position, the belt escape home position sensor does not go on within 1.5 sec.

Canon iR2230 Common Errors

The most common error codes.

Error
E064-0005Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 mse
E602-09XXDescription: There is an error on the hard disk. /DOSDEV5 is faulty.
E5F0-0002Description: Saddle paper positioning plate error The paper positioning plate home position sensor doest not go off when the paper positioning plate motor has been driven for 1 sec. Paper positioning plate motor (M4S)/paper positioning plate home positio
E537-8002Description: Front alignment error (Finisher-S1) The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position.
E514-0001Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is returned to home position, the belt escape home position sensor does not go on within 1.5 sec.
E064-0005Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 mse
E602-09XXDescription: There is an error on the hard disk. /DOSDEV5 is faulty.
E5F0-0002Description: Saddle paper positioning plate error The paper positioning plate home position sensor doest not go off when the paper positioning plate motor has been driven for 1 sec. Paper positioning plate motor (M4S)/paper positioning plate home positio
E537-8002Description: Front alignment error (Finisher-S1) The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position.
E514-0001Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is returned to home position, the belt escape home position sensor does not go on within 1.5 sec.