Canon iR2220 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2220 Top Searches

These results are ranked by popularity.

Error
E248-0003Description: A difference is discovered between the ID of EEPROM and the ID of ROM upon comparison while writing data
E712-0002Description: The transmission bit is not enabled 10 sec or more in the sync register of the communication IC (IPC) on e reader controller PCB
E577-0000Description: The return roller does not reach home position when the delivery motor (Ml) has been driven as much as will move it to the return roller home position sensor (S3)
E740-0002Description: The MAC address has a fault
E593-0001Description: The puncher not leave home position when the puncher shift motor is driven for 1 sec

Canon iR2220 Common Errors

The most common error codes.

Error
E248-0003Description: A difference is discovered between the ID of EEPROM and the ID of ROM upon comparison while writing data
E712-0002Description: The transmission bit is not enabled 10 sec or more in the sync register of the communication IC (IPC) on e reader controller PCB
E577-0000Description: The return roller does not reach home position when the delivery motor (Ml) has been driven as much as will move it to the return roller home position sensor (S3)
E740-0002Description: The MAC address has a fault
E593-0001Description: The puncher not leave home position when the puncher shift motor is driven for 1 sec
E248-0003Description: A difference is discovered between the ID of EEPROM and the ID of ROM upon comparison while writing data
E712-0002Description: The transmission bit is not enabled 10 sec or more in the sync register of the communication IC (IPC) on e reader controller PCB
E577-0000Description: The return roller does not reach home position when the delivery motor (Ml) has been driven as much as will move it to the return roller home position sensor (S3)
E740-0002Description: The MAC address has a fault
E593-0001Description: The puncher not leave home position when the puncher shift motor is driven for 1 sec