Canon iR2022 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2022 Top Searches

These results are ranked by popularity.

Error
E540-0003Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was operated, but it did not reach the sensor
E808-0000Description: Fixing drive circuit failure - The heater does not turn on. - A fixing drive motor failure was detected.
E719-0000Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial com
E001-0001Description: Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control.
E196-0002Description: Image processor PCB failure Error on writing and readout ROM of image processor PCB (option ROM).

Canon iR2022 Common Errors

The most common error codes.

Error
E540-0003Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was operated, but it did not reach the sensor
E808-0000Description: Fixing drive circuit failure - The heater does not turn on. - A fixing drive motor failure was detected.
E719-0000Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial com
E001-0001Description: Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control.
E196-0002Description: Image processor PCB failure Error on writing and readout ROM of image processor PCB (option ROM).
E540-0003Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was operated, but it did not reach the sensor
E808-0000Description: Fixing drive circuit failure - The heater does not turn on. - A fixing drive motor failure was detected.
E719-0000Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial com
E001-0001Description: Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control.
E196-0002Description: Image processor PCB failure Error on writing and readout ROM of image processor PCB (option ROM).