These results are ranked by popularity.
Error | |
---|---|
E100-0000 | Description: BD detection PCB failure The BD detection PCB is faulty. |
E542-0001 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The optional tray was operated, but the paper surface was not det |
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
E001-0000 | Description: Fixing unit temperature rise detection (by main thermistor) The main thermistor detected an abnormally high temperature (240 deg C) during temperature control. |
E197-0000 | Description: Printer engine communication error Erroneous communication between the DC controller PCB and image processor PCB was detected. |
The most common error codes.
Error | |
---|---|
E100-0000 | Description: BD detection PCB failure The BD detection PCB is faulty. |
E542-0001 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The optional tray was operated, but the paper surface was not det |
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
E001-0000 | Description: Fixing unit temperature rise detection (by main thermistor) The main thermistor detected an abnormally high temperature (240 deg C) during temperature control. |
E197-0000 | Description: Printer engine communication error Erroneous communication between the DC controller PCB and image processor PCB was detected. |
E100-0000 | Description: BD detection PCB failure The BD detection PCB is faulty. |
E542-0001 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The optional tray was operated, but the paper surface was not det |
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
E001-0000 | Description: Fixing unit temperature rise detection (by main thermistor) The main thermistor detected an abnormally high temperature (240 deg C) during temperature control. |
E197-0000 | Description: Printer engine communication error Erroneous communication between the DC controller PCB and image processor PCB was detected. |