Canon iR2018i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2018i Top Searches

These results are ranked by popularity.

Error
E744-0002Description: The language file is longer than the permitted size.
E019-0001Description: Waster toner full detection sensor is faulty. The waste toner full state was detected continuously for five or more seconds while the main motor was turning.
E531-0002Description: - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure The staple home position had been left once, but it was not reached again when 400 ms have lapsed since start of staple operation. In addition, the staple h
E584-0001Description: Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, r
E744-0003Description: The language file version does not match Bootable.

Canon iR2018i Common Errors

The most common error codes.

Error
E744-0002Description: The language file is longer than the permitted size.
E019-0001Description: Waster toner full detection sensor is faulty. The waste toner full state was detected continuously for five or more seconds while the main motor was turning.
E531-0002Description: - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure The staple home position had been left once, but it was not reached again when 400 ms have lapsed since start of staple operation. In addition, the staple h
E584-0001Description: Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, r
E744-0003Description: The language file version does not match Bootable.
E744-0002Description: The language file is longer than the permitted size.
E019-0001Description: Waster toner full detection sensor is faulty. The waste toner full state was detected continuously for five or more seconds while the main motor was turning.
E531-0002Description: - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure The staple home position had been left once, but it was not reached again when 400 ms have lapsed since start of staple operation. In addition, the staple h
E584-0001Description: Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, r
E744-0003Description: The language file version does not match Bootable.