Canon NP8580 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon NP8580 Top Searches

These results are ranked by popularity.

Error
E400Description: When an abnormality in communication occurs between the DC controller PCB detect RDF controller PCB.
E000Description: The temperature of the upper fixing roller has not increased above the specified level 90 seconds after switching power on. The temperature of the upper fixing roller does not reach 150 C within 8 minutes after switching power ON. The temper
E401Description: When a flag mounted on the pick-up roller HOME position sensor (S3), it indicates that M1 is turning. S3 should go ON and OFF two or more times in one second.
E001Description: The temperature of the upper fixing roller exceeds 250 C.
E402Description: The number of pulses in a 200 ms period is too low.

Canon NP8580 Common Errors

The most common error codes.

Error
E400Description: When an abnormality in communication occurs between the DC controller PCB detect RDF controller PCB.
E000Description: The temperature of the upper fixing roller has not increased above the specified level 90 seconds after switching power on. The temperature of the upper fixing roller does not reach 150 C within 8 minutes after switching power ON. The temper
E401Description: When a flag mounted on the pick-up roller HOME position sensor (S3), it indicates that M1 is turning. S3 should go ON and OFF two or more times in one second.
E001Description: The temperature of the upper fixing roller exceeds 250 C.
E402Description: The number of pulses in a 200 ms period is too low.
E400Description: When an abnormality in communication occurs between the DC controller PCB detect RDF controller PCB.
E000Description: The temperature of the upper fixing roller has not increased above the specified level 90 seconds after switching power on. The temperature of the upper fixing roller does not reach 150 C within 8 minutes after switching power ON. The temper
E401Description: When a flag mounted on the pick-up roller HOME position sensor (S3), it indicates that M1 is turning. S3 should go ON and OFF two or more times in one second.
E001Description: The temperature of the upper fixing roller exceeds 250 C.
E402Description: The number of pulses in a 200 ms period is too low.