Canon NP6085 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon NP6085 Top Searches

These results are ranked by popularity.

Error
E802Description: The relay (RL3) in the power supply unit does not operate in spite of the auto power-off signal.
E020Description: During copying, the toner supply signal is 0', indicating the absence of toner, for 3 min or more. During toner supply sequence at time of installation, the toner supply signal does not go '1' after 6 min or more.
E214Description: While the scanner cooling fan (FM1, FM10, FM11) is rotating, an error signal is generated for 2 sec or more.
E000Description: After power-on, the upper fixing roller does not reach 100 C within 5 min.
E030Description: After the total copy counter has turned OFF, an open circuit is detected for the total copy counter.

Canon NP6085 Common Errors

The most common error codes.

Error
E802Description: The relay (RL3) in the power supply unit does not operate in spite of the auto power-off signal.
E020Description: During copying, the toner supply signal is 0', indicating the absence of toner, for 3 min or more. During toner supply sequence at time of installation, the toner supply signal does not go '1' after 6 min or more.
E214Description: While the scanner cooling fan (FM1, FM10, FM11) is rotating, an error signal is generated for 2 sec or more.
E000Description: After power-on, the upper fixing roller does not reach 100 C within 5 min.
E030Description: After the total copy counter has turned OFF, an open circuit is detected for the total copy counter.
E802Description: The relay (RL3) in the power supply unit does not operate in spite of the auto power-off signal.
E020Description: During copying, the toner supply signal is 0', indicating the absence of toner, for 3 min or more. During toner supply sequence at time of installation, the toner supply signal does not go '1' after 6 min or more.
E214Description: While the scanner cooling fan (FM1, FM10, FM11) is rotating, an error signal is generated for 2 sec or more.
E000Description: After power-on, the upper fixing roller does not reach 100 C within 5 min.
E030Description: After the total copy counter has turned OFF, an open circuit is detected for the total copy counter.