Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon CP2150 Top Searches

These results are ranked by popularity.

Error
E624Description: An error has occurred in the communication with the editor digitizer.
E043Description: The PLL lock signal (DMPLK) remains ‘1’ for 2 sec or more after the deck main motor drive signal is generated.
E531-0001Description: The stapler does not leave the stapling home position even when the stapler motor has been driven for 0.5 sec.
E5F1-0001Description: The number of detention pulses of the folding motor clock sensor drops to a specific value or lower.
E800-0001Description: The shut-off relay of the main power switch (SW1) is found to have an open circuit.

Canon CP2150 Common Errors

The most common error codes.

Error
E624Description: An error has occurred in the communication with the editor digitizer.
E043Description: The PLL lock signal (DMPLK) remains ‘1’ for 2 sec or more after the deck main motor drive signal is generated.
E531-0001Description: The stapler does not leave the stapling home position even when the stapler motor has been driven for 0.5 sec.
E5F1-0001Description: The number of detention pulses of the folding motor clock sensor drops to a specific value or lower.
E800-0001Description: The shut-off relay of the main power switch (SW1) is found to have an open circuit.
E624Description: An error has occurred in the communication with the editor digitizer.
E043Description: The PLL lock signal (DMPLK) remains ‘1’ for 2 sec or more after the deck main motor drive signal is generated.
E531-0001Description: The stapler does not leave the stapling home position even when the stapler motor has been driven for 0.5 sec.
E5F1-0001Description: The number of detention pulses of the folding motor clock sensor drops to a specific value or lower.
E800-0001Description: The shut-off relay of the main power switch (SW1) is found to have an open circuit.