Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother MFC9340CDW Top Searches

These results are ranked by popularity.

Error
6901Description: Some fuser unit errors occurred at power-ON or upon recovery from sleep mode.
E100Description: Program error.
4004Description: Number of the drum unit (Cyan) rotations reaches the upper limit soon.
9A01Description: Error occurred with the value measured during auto color registration performed from the control panel.
B000Description: The first or second side CIS flat cable was detected to be not inserted correctly.

Brother MFC9340CDW Common Errors

The most common error codes.

Error
6901Description: Some fuser unit errors occurred at power-ON or upon recovery from sleep mode.
E100Description: Program error.
4004Description: Number of the drum unit (Cyan) rotations reaches the upper limit soon.
9A01Description: Error occurred with the value measured during auto color registration performed from the control panel.
B000Description: The first or second side CIS flat cable was detected to be not inserted correctly.
6901Description: Some fuser unit errors occurred at power-ON or upon recovery from sleep mode.
4004Description: Number of the drum unit (Cyan) rotations reaches the upper limit soon.
9A01Description: Error occurred with the value measured during auto color registration performed from the control panel.
E100Description: Program error.
050BDescription: When the temperature of the center thermistor of the fuser unit is lower than the idle temperature, the side thermistor of the fuser unit detected a temperature higher than the specified value.