These results are ranked by popularity.
| Error | |
|---|---|
| 9309 | Description: Detected that there was no paper set in all trays when TrayAuto was selected for printing. |
| 4D01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box is reaching the upper limit in the continuous printing mode. |
| 6901 | Description: Some fuser unit errors occurred at power-ON or upon recovery from sleep mode. |
| 0505 | Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time. |
| AC00 | Description: When scanning the fax, white or black correction data for the second side CIS was not within the correct range (first time). |
The most common error codes.
| Error | |
|---|---|
| 9309 | Description: Detected that there was no paper set in all trays when TrayAuto was selected for printing. |
| 4D01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box is reaching the upper limit in the continuous printing mode. |
| 6901 | Description: Some fuser unit errors occurred at power-ON or upon recovery from sleep mode. |
| 0505 | Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time. |
| AC00 | Description: When scanning the fax, white or black correction data for the second side CIS was not within the correct range (first time). |
| 9309 | Description: Detected that there was no paper set in all trays when TrayAuto was selected for printing. |
| 4D01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box is reaching the upper limit in the continuous printing mode. |
| 6901 | Description: Some fuser unit errors occurred at power-ON or upon recovery from sleep mode. |
| 0505 | Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time. |
| AC00 | Description: When scanning the fax, white or black correction data for the second side CIS was not within the correct range (first time). |
