These results are ranked by popularity.
| Error | |
|---|---|
| 0506 | Description: The center thermistor of the fuser unit detected a temperature fall greater than the specified value within the specified time. |
| AD00 | Description: Image processing cannot be completed correctly because the number of pixels required for image processing is insufficient in the scanned first side data. |
| 6902 | Description: After the error was detected at the fuser unit, power was turned ON again and the error is being checked. (If power is turned OFF and ON after error code 6901 occurred, this code is displayed for about 15 minutes.) |
| D800 | Description: An error occurred while initializing the touch panel. |
| 8C00 | Description: There is no paper set in the manual feed slot on the manual feed slot printing. |
The most common error codes.
| Error | |
|---|---|
| 0506 | Description: The center thermistor of the fuser unit detected a temperature fall greater than the specified value within the specified time. |
| AD00 | Description: Image processing cannot be completed correctly because the number of pixels required for image processing is insufficient in the scanned first side data. |
| 6902 | Description: After the error was detected at the fuser unit, power was turned ON again and the error is being checked. (If power is turned OFF and ON after error code 6901 occurred, this code is displayed for about 15 minutes.) |
| D800 | Description: An error occurred while initializing the touch panel. |
| 8C00 | Description: There is no paper set in the manual feed slot on the manual feed slot printing. |
| 0506 | Description: The center thermistor of the fuser unit detected a temperature fall greater than the specified value within the specified time. |
| AD00 | Description: Image processing cannot be completed correctly because the number of pixels required for image processing is insufficient in the scanned first side data. |
| 6902 | Description: After the error was detected at the fuser unit, power was turned ON again and the error is being checked. (If power is turned OFF and ON after error code 6901 occurred, this code is displayed for about 15 minutes.) |
| D800 | Description: An error occurred while initializing the touch panel. |
| 8C00 | Description: There is no paper set in the manual feed slot on the manual feed slot printing. |
