These results are ranked by popularity.
| Error | |
|---|---|
| A6 | Description: Scanning failure upon FAX transmission. (Scanning unit failure for the second time or later) |
| 6A | Description: Fuser unit error. (The center thermistor does not detect 60°C within in the specified time.) |
| B8 | Description: A/D converter standard voltage failure; at Low side. |
| 7A | Description: A lock signal of the main motor cannot be detected. |
| E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
The most common error codes.
| Error | |
|---|---|
| A6 | Description: Scanning failure upon FAX transmission. (Scanning unit failure for the second time or later) |
| 6A | Description: Fuser unit error. (The center thermistor does not detect 60°C within in the specified time.) |
| B8 | Description: A/D converter standard voltage failure; at Low side. |
| 7A | Description: A lock signal of the main motor cannot be detected. |
| E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
| A6 | Description: Scanning failure upon FAX transmission. (Scanning unit failure for the second time or later) |
| 6A | Description: Fuser unit error. (The center thermistor does not detect 60°C within in the specified time.) |
| B8 | Description: A/D converter standard voltage failure; at Low side. |
| 7A | Description: A lock signal of the main motor cannot be detected. |
| E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
