Brother MFC5490CN Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother MFC5490CN Top Searches

These results are ranked by popularity.

Error
5DDescription: Current protection for the driver IC activated when the purge cam was being driven.
A3Description: The document rear sensor does not come ON during document pull-in operation.
80Description: At the start of FAX message printing, the controller detects that paper is smaller than A4 size in width.
E5Description: Write error in EEPROM on the cordless PCB.
20, 21, 22, 23Description: Cannot identify the ink cartridge loaded because the signal values detected by the corresponding ink empty sensor and ink cartridge detection sensor are different from the specified values.

Brother MFC5490CN Common Errors

The most common error codes.

Error
5DDescription: Current protection for the driver IC activated when the purge cam was being driven.
A3Description: The document rear sensor does not come ON during document pull-in operation.
80Description: At the start of FAX message printing, the controller detects that paper is smaller than A4 size in width.
E5Description: Write error in EEPROM on the cordless PCB.
20, 21, 22, 23Description: Cannot identify the ink cartridge loaded because the signal values detected by the corresponding ink empty sensor and ink cartridge detection sensor are different from the specified values.
5DDescription: Current protection for the driver IC activated when the purge cam was being driven.
A3Description: The document rear sensor does not come ON during document pull-in operation.
80Description: At the start of FAX message printing, the controller detects that paper is smaller than A4 size in width.
E5Description: Write error in EEPROM on the cordless PCB.
20, 21, 22, 23Description: Cannot identify the ink cartridge loaded because the signal values detected by the corresponding ink empty sensor and ink cartridge detection sensor are different from the specified values.