These results are ranked by popularity.
| Error | |
|---|---|
| D6 | Description: No MODEM interrupt for 60 seconds. |
| 880B | Description: When the power is turned on or the recording paper cover ASSY is opened and closed, either of the paper-edge sensor or paper ejection sensor is ON. |
| A306 | Description: Although the CIS scanner area setting operation has been completed (Function code 55 in the maintenance mode), the document rear sensor remains OFF. |
| BA | Description: Scanning error: The left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected. |
| E1 | Description: Microprocessor (MPU) error on the control panel PCB. |
The most common error codes.
| Error | |
|---|---|
| D6 | Description: No MODEM interrupt for 60 seconds. |
| 880B | Description: When the power is turned on or the recording paper cover ASSY is opened and closed, either of the paper-edge sensor or paper ejection sensor is ON. |
| A306 | Description: Although the CIS scanner area setting operation has been completed (Function code 55 in the maintenance mode), the document rear sensor remains OFF. |
| BA | Description: Scanning error: The left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected. |
| E1 | Description: Microprocessor (MPU) error on the control panel PCB. |
| D6 | Description: No MODEM interrupt for 60 seconds. |
| 880B | Description: When the power is turned on or the recording paper cover ASSY is opened and closed, either of the paper-edge sensor or paper ejection sensor is ON. |
| A306 | Description: Although the CIS scanner area setting operation has been completed (Function code 55 in the maintenance mode), the document rear sensor remains OFF. |
| BA | Description: Scanning error: The left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected. |
| E1 | Description: Microprocessor (MPU) error on the control panel PCB. |
