These results are ranked by popularity.
Error | |
---|---|
7602 | Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass. |
8708 | Description: MX 1bin stack sensor detected the eject paper full state at the start of printing when the MX 1bin was selected as the output tray. |
0B02 | Description: An error occurred in the high-voltage power supply PCB ASSY when the machine was in the ready state. |
9706 | Description: When printing from paper tray 5, a paper size not supported for paper tray 5 was specified from the driver. |
8904 | Description: The back cover/duplex tray sensor detected that the cover was open during duplex printing. (After registering printing data to engine) |
The most common error codes.
Error | |
---|---|
7602 | Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass. |
8708 | Description: MX 1bin stack sensor detected the eject paper full state at the start of printing when the MX 1bin was selected as the output tray. |
0B02 | Description: An error occurred in the high-voltage power supply PCB ASSY when the machine was in the ready state. |
9706 | Description: When printing from paper tray 5, a paper size not supported for paper tray 5 was specified from the driver. |
8904 | Description: The back cover/duplex tray sensor detected that the cover was open during duplex printing. (After registering printing data to engine) |
7602 | Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass. |
8708 | Description: MX 1bin stack sensor detected the eject paper full state at the start of printing when the MX 1bin was selected as the output tray. |
0B02 | Description: An error occurred in the high-voltage power supply PCB ASSY when the machine was in the ready state. |
9706 | Description: When printing from paper tray 5, a paper size not supported for paper tray 5 was specified from the driver. |
8904 | Description: The back cover/duplex tray sensor detected that the cover was open during duplex printing. (After registering printing data to engine) |