Brother HL-L6300DWT Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother HL-L6300DWT Top Searches

These results are ranked by popularity.

Error
0508Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON.
7502Description: When printing from the paper tray 3, the registration front sensor or the T2/T3TT jam sensor does not detect paper pass within the specified time after the T3(LT or TT) paper feed sensor detected paper pass.
C004Description: Cannot acquire current time which is required for user authentication because the time has not been acquired.
8708Description: MX 1bin stack sensor detected the eject paper full state at the start of printing when the MX 1bin was selected as the output tray.
5004Description: Printable pages set for PF kit 3 have reached the upper limit.

Brother HL-L6300DWT Common Errors

The most common error codes.

Error
0508Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON.
7502Description: When printing from the paper tray 3, the registration front sensor or the T2/T3TT jam sensor does not detect paper pass within the specified time after the T3(LT or TT) paper feed sensor detected paper pass.
C004Description: Cannot acquire current time which is required for user authentication because the time has not been acquired.
8708Description: MX 1bin stack sensor detected the eject paper full state at the start of printing when the MX 1bin was selected as the output tray.
5004Description: Printable pages set for PF kit 3 have reached the upper limit.
0508Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON.
7502Description: When printing from the paper tray 3, the registration front sensor or the T2/T3TT jam sensor does not detect paper pass within the specified time after the T3(LT or TT) paper feed sensor detected paper pass.
C004Description: Cannot acquire current time which is required for user authentication because the time has not been acquired.
8708Description: MX 1bin stack sensor detected the eject paper full state at the start of printing when the MX 1bin was selected as the output tray.
5004Description: Printable pages set for PF kit 3 have reached the upper limit.