Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother HL-L5100DN Top Searches

These results are ranked by popularity.

Error
7B01Description: The MX jam lower sensor does not detect paper pass within the specified time after the eject sensor detected paper pass.
4C01Description: Dot counter or develop roller counter of the toner has reached the upper limit.
0401Description: Cannot detect the synchronized signal of the polygon motor for the laser unit (second time).
C700Description: There is insufficient memory to expand PC print data. Memo: • HL-L5000D (Except for Iran), HL-5580D, HL-5585D: Main Firmware D001GJ_D.djf (ver.1.17) HL-L5000D (For Iran): Main Firmware D004PT_C.djf (ver.1.08) HL-L5100DN, HL-L5100DNT, HL-5590
9003Description: When printing from the paper tray 2, the size of paper set in the paper tray 2 does not match the size specified by the driver.

Brother HL-L5100DN Common Errors

The most common error codes.

Error
7B01Description: The MX jam lower sensor does not detect paper pass within the specified time after the eject sensor detected paper pass.
4C01Description: Dot counter or develop roller counter of the toner has reached the upper limit.
0401Description: Cannot detect the synchronized signal of the polygon motor for the laser unit (second time).
C700Description: There is insufficient memory to expand PC print data. Memo: • HL-L5000D (Except for Iran), HL-5580D, HL-5585D: Main Firmware D001GJ_D.djf (ver.1.17) HL-L5000D (For Iran): Main Firmware D004PT_C.djf (ver.1.08) HL-L5100DN, HL-L5100DNT, HL-5590
9003Description: When printing from the paper tray 2, the size of paper set in the paper tray 2 does not match the size specified by the driver.
7B01Description: The MX jam lower sensor does not detect paper pass within the specified time after the eject sensor detected paper pass.
4C01Description: Dot counter or develop roller counter of the toner has reached the upper limit.
0401Description: Cannot detect the synchronized signal of the polygon motor for the laser unit (second time).
C700Description: There is insufficient memory to expand PC print data. Memo: • HL-L5000D (Except for Iran), HL-5580D, HL-5585D: Main Firmware D001GJ_D.djf (ver.1.17) HL-L5000D (For Iran): Main Firmware D004PT_C.djf (ver.1.08) HL-L5100DN, HL-L5100DNT, HL-5590
9003Description: When printing from the paper tray 2, the size of paper set in the paper tray 2 does not match the size specified by the driver.