Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother DCP-L2551DN Top Searches

These results are ranked by popularity.

Error
4D01Description: Dot count or develop roller counter of the toner cartridge in models without toner box is reaching the upper limit in the continuous printing mode.
A200Description: The document scanning position sensor detected that the document length was 90 cm or more during the one-side scanning.
0505Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time.
C700Description: The memory is insufficient to expand the data of PC-Print.
7000Description: After the registration rear sensor detects paper pass, the eject sensor does not detect paper pass.

Brother DCP-L2551DN Common Errors

The most common error codes.

Error
4D01Description: Dot count or develop roller counter of the toner cartridge in models without toner box is reaching the upper limit in the continuous printing mode.
A200Description: The document scanning position sensor detected that the document length was 90 cm or more during the one-side scanning.
0505Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time.
C700Description: The memory is insufficient to expand the data of PC-Print.
7000Description: After the registration rear sensor detects paper pass, the eject sensor does not detect paper pass.
4D01Description: Dot count or develop roller counter of the toner cartridge in models without toner box is reaching the upper limit in the continuous printing mode.
A200Description: The document scanning position sensor detected that the document length was 90 cm or more during the one-side scanning.
0505Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time.
C700Description: The memory is insufficient to expand the data of PC-Print.
7000Description: After the registration rear sensor detects paper pass, the eject sensor does not detect paper pass.