Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother DCP-L2512D Top Searches

These results are ranked by popularity.

Error
6801Description: The side thermistor detected a temperature higher than the specified value.
BF00Description: The document scanning position sensor detected that the document length was 400 mm or longer and could not be fed to ADF (double-side restoration).
4C01Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode.
0503Description: The center thermistor of the fuser unit detected a temperature higher than the specified value.
8904Description: The back cover sensor detected the open state during 2-sided printing (after the registration of printing in the engine).

Brother DCP-L2512D Common Errors

The most common error codes.

Error
6801Description: The side thermistor detected a temperature higher than the specified value.
BF00Description: The document scanning position sensor detected that the document length was 400 mm or longer and could not be fed to ADF (double-side restoration).
4C01Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode.
0503Description: The center thermistor of the fuser unit detected a temperature higher than the specified value.
8904Description: The back cover sensor detected the open state during 2-sided printing (after the registration of printing in the engine).
6801Description: The side thermistor detected a temperature higher than the specified value.
BF00Description: The document scanning position sensor detected that the document length was 400 mm or longer and could not be fed to ADF (double-side restoration).
4C01Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode.
0503Description: The center thermistor of the fuser unit detected a temperature higher than the specified value.
8904Description: The back cover sensor detected the open state during 2-sided printing (after the registration of printing in the engine).