These results are ranked by popularity.
| Error | |
|---|---|
| 2E00 | Description: Could not communicate with the cartridge sensor on the machine side. |
| E701 | Description: System error in the flash ROM |
| A200 | Description: The document scanning position sensor detected that the document length was 90 cm or more during the one-side scanning. |
| 0300 | Description: Cannot detect the lock signal of the polygon motor for the laser unit. (second time) |
| 7000 | Description: After the registration rear sensor detects paper pass, the eject sensor does not detect paper pass. |
The most common error codes.
| Error | |
|---|---|
| 2E00 | Description: Could not communicate with the cartridge sensor on the machine side. |
| E701 | Description: System error in the flash ROM |
| A200 | Description: The document scanning position sensor detected that the document length was 90 cm or more during the one-side scanning. |
| 0300 | Description: Cannot detect the lock signal of the polygon motor for the laser unit. (second time) |
| 7000 | Description: After the registration rear sensor detects paper pass, the eject sensor does not detect paper pass. |
| 2E00 | Description: Could not communicate with the cartridge sensor on the machine side. |
| E701 | Description: System error in the flash ROM |
| A200 | Description: The document scanning position sensor detected that the document length was 90 cm or more during the one-side scanning. |
| 0300 | Description: Cannot detect the lock signal of the polygon motor for the laser unit. (second time) |
| 7000 | Description: After the registration rear sensor detects paper pass, the eject sensor does not detect paper pass. |
