These results are ranked by popularity.
Error | |
---|---|
0508 | Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON. |
8808 | Description: MX back cover sensor detected the open cover when the MX was selected as the output tray (before registering printing data to engine). |
9206 | Description: When printing from the paper tray 5, paper type setting in the machine does not match the setting in the driver. |
7602 | Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass. |
1802 | Description: A communication error occurred between the ASIC and T3LT control PCB ASSY in the engine. (LT only) |
The most common error codes.
Error | |
---|---|
0508 | Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON. |
8808 | Description: MX back cover sensor detected the open cover when the MX was selected as the output tray (before registering printing data to engine). |
9206 | Description: When printing from the paper tray 5, paper type setting in the machine does not match the setting in the driver. |
7602 | Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass. |
1802 | Description: A communication error occurred between the ASIC and T3LT control PCB ASSY in the engine. (LT only) |
0508 | Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON. |
8808 | Description: MX back cover sensor detected the open cover when the MX was selected as the output tray (before registering printing data to engine). |
9206 | Description: When printing from the paper tray 5, paper type setting in the machine does not match the setting in the driver. |
7602 | Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass. |
1802 | Description: A communication error occurred between the ASIC and T3LT control PCB ASSY in the engine. (LT only) |