These results are ranked by popularity.
| Error | |
|---|---|
| 6B | Description: Fuser temperature does not reach 100°C within the specified time (center thermistor) |
| BF | Description: ADF duplex scanning cannot be implemented due to too long document |
| 80 | Description: Fax paper size is incorrect (The paper is smaller 10mm than the letter size (11inch) in Fax List/ Report) |
| 36 | Description: HVPS PCB during standby failure |
| 99 | Description: Specified paper size is not supported for duplex printing (Duplex) |
The most common error codes.
| Error | |
|---|---|
| 6B | Description: Fuser temperature does not reach 100°C within the specified time (center thermistor) |
| BF | Description: ADF duplex scanning cannot be implemented due to too long document |
| 80 | Description: Fax paper size is incorrect (The paper is smaller 10mm than the letter size (11inch) in Fax List/ Report) |
| 36 | Description: HVPS PCB during standby failure |
| 99 | Description: Specified paper size is not supported for duplex printing (Duplex) |
| 6B | Description: Fuser temperature does not reach 100°C within the specified time (center thermistor) |
| BF | Description: ADF duplex scanning cannot be implemented due to too long document |
| 80 | Description: Fax paper size is incorrect (The paper is smaller 10mm than the letter size (11inch) in Fax List/ Report) |
| 36 | Description: HVPS PCB during standby failure |
| 99 | Description: Specified paper size is not supported for duplex printing (Duplex) |
