These results are ranked by popularity.
| Error | |
|---|---|
| E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
| 83 | Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.) |
| A7 | Description: Scanning color parameter fille failure. |
| 59 | Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.) |
| B9 | Description: Scanning light adjustment error. |
The most common error codes.
| Error | |
|---|---|
| E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
| 83 | Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.) |
| A7 | Description: Scanning color parameter fille failure. |
| 59 | Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.) |
| B9 | Description: Scanning light adjustment error. |
| E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
| 83 | Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.) |
| A7 | Description: Scanning color parameter fille failure. |
| 59 | Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.) |
| B9 | Description: Scanning light adjustment error. |
